PRIMEWELD Plasma Cutter CT520D 50 A /200 A Tig Arc Mma Welder 110/220V NEW

PRIMEWELD Plasma Cutter CT520D 50 A /200 A Tig Arc Mma Welder 110/220V NEW 2018
Item Description
The PrimeWeld CT520D multipurpose 3 in 1 unit offers a variety of multiple welding and cutting functions. It is able to cut various types of metal up to 1/2’’ with the 50A plasma cutting function. In addition, this unit can switch between DC TIG Welder and DC STICK Welder quickly and easily. With a hand carrying weight at 32lbs, this unit is portable and reliable featuring a duty cycle of 60% at max amps on all processes
High working efficiency / DC output can cut the same thickness on 110V or 220V!!!
50-amp air plasma cutter
200-amp DC TIG welder and DC Stick welder (High Frequency Start)
Automatic dual voltage / dual frequency (110/220-volt 50/60Hz)
Suitable for cutting and welding stainless steel, mild steel, aluminium(cut only), and other metal materials
Flexible TIG torch comes with long and short back caps for welding in tight places
Machine is equipped with a large cooling fan and is thermostatically protected for a longer life span
Strong and very reliable – ready for Industrial/Commercial and any other application
Equipped with an advanced inverter technology and high cutting frequency V-MOSFET from TOSHIBA/FUJI.
Certification: CE, CCC, CSA and ISO-9001 certification
Four knobs on front of machine:
Pre-flow time:   to adjust the time for air/gas blow out of torch before welding
Current:   for welding/cutting current
Down slope:   would help to weld stainless steel
Post gas/air time:   to adjust the time for air/gas blow out of torch after welding
GENERAL SPECIFICATION
Input Voltages
110/220V, 1-PH,  50/60Hz
Power  Efficiency
85%
Dimensions  with Handle
17” (432mm) L
8” (203mm) H
14” (356mm) W
Weight
32lbs ( 14.5kg)
Input Power  Cable Length
6’ (1.8m)
PLASMA CUTTING
SPECIFICATION
Rated Input Power  Requirement
110/220V, 1-PH,  27A±15%, 50/60Hz
Output Current
10~50A @ 110/220V
Duty cycle @  40°C (104°F)
60% @ 50A
100% @ 40A
Gas Supply
Clean, dry,  oil-free air
Recommended Gas  Inlet Flow Rate/Pressure
3.6scfm @  65psi, 80L/min
Cutting Materials
Mild steel,  stainless steel, aluminum, etc.
Maximum  Rated Cutting Thickness*
1/2″ (12.7mm)
TIG WELDING
SPECIFICATION
Rated input  power requirement
110/220V,  1-PH, 17A±15%, 50/60Hz
Output  current
10~200A @110/220V
Gas supply
Clean, dry,  oil-free argon gas
Recommended  gas inlet flow rate
2-5 L/M
Duty cycle @  40°C (104°F)
60% @ 200A
100% @ 150A
Welding  Material
Steel,  Stainless, Moly, Ferrous
STICK WELDING
SPECIFICATION
Rated input power  requirement
110/220V,  1-PH, 23A±15%, 50/60Hz
Output  current
10~200A @ 110/220V
Duty cycle @  40°C (104°F)
60% @ 200A
100% @ 95A
Welding  Material
Steel,  Stainless, Moly, Ferrous
WARRANTY
1 Year Warranty Included
Whats Included:
Plasma Cutter – Inverter Unit
Ground Cable & Ground Clamp
High Performance Cutting Torch with initial consumables
TIG Torch with initial consumables
Air Filter / Regulator & Hose
Owner’s manual
Buyer must purchase Air Supply, power plug and argon tank for tig welding